Products

Helpful Links



Join our mailing list!


  Home > Fuel Systems, Big Line Kits > Fuel Systems > Other fuel system upgrades >

***Out of Stock*** Draw Straw™ 1
***Out of Stock*** Draw Straw™ 1
 
Alternative Views:


Accept no imitations! Our DrawStraw™ units are the original DrawStraws!

DrawStraw 1 this a three port unit for use with your Airdog or other systems.

For 94-04 standard tank modules. (Trucks with engine or filter mounted pumps)


Our CNC machined billet DS1 with dual return ports allows the user to install a regulated return fuel system without drilling the top of the module or cutting the filler neck tube for the second return. Makes for a super clean and secure installation and brings all of the return fuel back into the module for replenishment during low fuel situations.
The
Draw Straw™ 1
can be used in Dodge trucks with the standard fuel tank module from 94-04.
Comes with:
  • DrawStraw 1 billet unit
  • Nylon draw tube (pre attached)
  • 3/8" and 1/2" push lock pump supply connections
  • 5/16" OE type J2044 male quick connect return connection (pre installed)
  • 3/8" & 1/2" push lock supply pump return connections for a regulated return system (AirDog, and all other systems)
  • Plug for third port if not being used.
All necessary components are included*, no need to go shopping for extra parts and no tank drilling!
AirDog and other regulated return system installations should route both return lines to the DS1 for best results.

As always our kits are compatible with pumps and pump systems that have 1/2" or 3/8" fuel line for the Dodge Cummins application.

Picture for representation only, units will arrive in plain fully machined aluminum.
Uses your OE grommet, internal modification to fuel module required.

DS1 for standard modules only.

For trucks with in-tank pumps check our Draw Straw™ V P/N DS5


Our aluminum components are manufactured in house using domestic aluminum bar stock.

Picture for representation only.
May come with steel or brass push lock fittings.


Warning Triangle WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.


Our Price: $78.00


Part Number (P/N): DS1

Fuel Line Size

Fuel line:
18 inches 3/8 fuel line and clamp needed for OEM installation [Add $4.99]
Prefilter, external

1/2" 140 mic prefilter [Add $10.00]
3/8 150 mic prefilter [Add $10.00]

Qty:  
Description
 
DSI (1.3) (18x4x4)


Browse for more products in the same category as this item:

Fuel Systems, Big Line Kits > Fuel Systems > Other fuel system upgrades
Fuel Systems, Big Line Kits > DrawStraw™ Fuel Module Upgrades
AirDog Parts & Accessories > DrawStraws™
Fuel Systems, Big Line Kits > Fuel Systems
Fuel Systems, Big Line Kits
AirDog Parts & Accessories