View CartMy Account / Order StatusHelp


Join our mailing list!

(Your shopping cart is empty)

  Home > Fuel Systems > Fuel Systems > Other fuel system upgrades >

  Draw Straw™ I
 
 
Newly redesigned DSI with all three connections facing forward !
For 94-04 standard tank modules. Trucks with engine or filter mounted pumps.

By popular demand the original DrawStraw
I is now available again in dual return port configuration. A few  years ago when we offered the DSI with dual return ports there was little interest, now with the wide popularity of FASS, AirDog and other regulated fuel systems we have brought this unit back.
Our CNC machined billet DSI with dual return ports allows the user to install a regulated return fuel system without drilling the top of the module or cutting the filler neck tube for the second return, makes for a super clean and secure installation and brings all the return fuel back into the module for replenishment during low fuel situations.
The
Draw Straw™ I
  can be used in Dodge trucks with the standard fuel tank module from 94-04.
Comes with:
  • DrawStraw I anodized billet unit with nylon tube attached
  • 3/8" and 1/2" pushlock pump supply connections
  • 5/16" OEM Dorman type male quick connect return connection
  • 3/8" / 1/2" supply pump return connections for a regulated return system (FASS, AirDog)
  • Plug for third port if not being used.
All necessary components are included*, no need to go shopping for extra parts and no tank drilling!
FASS and AirDog installations should route both return lines to the DSI for best results.

Unit comes unassembled.
Uses OEM grommet, internal modification to fuel module required.

DSI for standard modules only.

For trucks with in-tank pumps check our Draw Straw™ V    P/N   DSV

Picture for representation only.
May come with steel or brass fittings.
*If used as an OEM replacement with a stock fuel system 18" of 3/8 fuel line will be needed, see below.


Our Price: $49.99


Product Code: DSI

Fuel Line Size

Fuel line:
18 inches 3/8 fuel line and clamp needed for OEM installation [Add $3.99]

1/2" 140 mic prefilter [Add $8.99]
3/8 140 mic prefilter [Add $4.99]

Qty:  
Description
 
Draw Straw I
For standard tank modules 94-04

 

Related Products...
push lock
Our Price: $9.99
Add
Draw Straw II 1/2 in. draw tube and 1/2 in. pushlo
Our Price: $29.99
Add
Universal Remote Dual Fuel Filter Kit
Our Price: $109.99
Add
Parker Super Flex fuel line 1/2"
Our Price: $2.19
Add
alliant mechanical lift pump
Our Price: $89.99
Add


 Share your knowledge of this product with other customers... Be the first to write a review.



Browse for more products in the same category as this item:

Fuel Systems > Fuel Systems > Other fuel system upgrades
Fuel Systems > DrawStraw™ Fuel Module Upgrades
AirDog Parts & Accessories > DrawStraws™


AFE Pro DryS OE Replacement Filter 03-07 Dodge Cummins $70.87
94-98 Dodge Ram 75 Horsepower Injectors $599.00
AFE Pro-DryS 07.5-08 Stage 2 Cold Air Type CX Intake System 6.7 $310.00
AFE Pro-DryS Stage 2 Cold Air Type CX Intake System $425.50
3/8 in Pushlock X 1/2 in. NPT. Brass. $1.99
www.vulcanperformance.com

 About Us
 
 Privacy Policy
 Send Us Feedback
 
Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © 2007 www.vulcanperformance.com. All Rights Reserved.
Sell Online with Volusion.