Helpful Links

Join our mailing list!

  Home > Fuel Systems, Big Line Kits > Fuel Systems > Other fuel system upgrades >

Modified Fuel Module w/ DrawStraw™ Installed
Modified Fuel Module w/ DrawStraw™ Installed

Note: Please read below before ordering.

New modified fuel module with a DS installed.
For 98.5-08 trucks only.

We take a brand new module unit, modify it and install our 1/2" DrawStraw™ system.
These units have 5/16 and 3/8 Dorman (J2044) type male connection for the return lines and your choice of supply connections below.
No need to cut into your filler neck for your AirDog or other system return line, both return lines can go into the module bucket to help replenish the fuel supply when fuel levels are low (may need additional fittings, see below).
Sending unit connection plugs in the same as OE, all have new sending units and floats.
This unit does not include a vent, be certain your fuel cap vent is working properly for both pressure and vacuum.

Make supply line connection selection below.

To connect to the module return the AirDog requires an adapter, the AirDog II does not. If you need a 1/2" return adapter for your AirDog system select the option (QCFM375500) below.

High volume pumps 150 GPH and higher may require an High Volume Return, use P/N

Module comes as shown with no other accessories.O-ring(s) for installation are included for 98.5-04 trucks.
The FMDS does not have a pump inside.

If you would like your unit custom configured to your new AirDog/Raptor Quick Connect system give us a call as there are several fitting configurations depending on the model, year and GPH you have.

Our kits are compatible with all available lift pumps and pump systems for the Dodge Cummins application in 1/2 or 3/8". Please call if you have a special application.

For 98.5-08 Dodge Ram only, fuel gauge will not read properly if used on 1998 and older 12v applications, for 09 and up trucks the module orientation may not be correct
(Connections may be aimed in the wrong direction) and additional hose length for supply and return will be required.

If you have any questions please call before ordering 360-263-6037

These modules are made to order, be certain to read this page thoroughly before ordering as there are
NO returns on fuel modules.

Picture for representation only, actual unit may vary depending on the specific options ordered.

Our Price: $295.00

Availability:: Usually Ships in 2 to 3 Business Days
Part Number (P/N): FMDS

Supply Pump Return (If applicable):
3/8 QC to 1/2 pushlock barb for 1/2" return hose to module. FQC68PL [Add $6.00]
3/8 QC to 3/8 barb (w/clamp) for 3/8 return hose to module. FQC6 [Add $7.00]

Suction Port*:
Extension hose and 3/8 male QC to attach OE fuel line.
3/8" Male Quick Connect
1/2" Male Quick Connect
3/8" Push Lock
1/2" Push Lock

Year - Must select*:

Prefilter, external

1/2" 150 mic in-line external prescreen filter w/clamps P551770 [Add $9.99]
3/8" 150 mic in-line external prescreen filter w/clamps P550974 [Add $8.99]

FMDS (6.9)

Browse for more products in the same category as this item:

Fuel Systems, Big Line Kits > Fuel Systems > Other fuel system upgrades
Fuel Systems, Big Line Kits > DrawStraw™ Fuel Module Upgrades
Fuel Systems, Big Line Kits > Fuel Systems
Fuel Systems, Big Line Kits