Products

Helpful Links



Join our mailing list!


  Home > Fuel Systems, Big Line Kits > Fuel Systems > Other fuel system upgrades >

P Pump Dual Feed Hose
P Pump Dual Feed Hose


 

VPMAX Big Line Dual Feed Kit for a 5/8" Supply Line for 94-98 12V Dodge Cummins trucks.
This is similar to our original kit but with a -10 Tee and a -10 to 5/8 push lock end for your 5/8" Hose.

Allows fuel to enter from two points to keep that hungry P Pump fed!

Hose and fitting assembly comes with hoses attached to fittings as shown in picture ready to use. Tee has an -10 male JIC(AN) connection on all three ends. Metric adapter fittings included
We use high quality Parker 836 blue push lock hose in this assembly. Includes 5/8" Push lock swivel end for your 5/8" supply hose.



Note:The plug on the front of the pump requires a 10MM hex key to remove (do NOT use a 3 /8 hex key). These plugs can be difficult to remove without an impact wrench, be careful to not strip the hex out of the plug.

If you need additional fittings check below.




Our Price: $79.00


Availability:: Usually Ships in 24 Hours
Part Number (P/N): PPDF58


Accessories:
Filter to Dual Feed accessory kit P/N FDFK [Add $29.00]Kit includes -08 metric adapter for filter outlet, 1/2" 90 deg push lock, 1/2" straight push lock (for dual feed kit connection) and 14" of Parker 386 hose. Assembled on one end only so customer may adjust length.

Qty:  
Description
 
PPDF58      (1.5)  10x10x2


Browse for more products in the same category as this item:

Fuel Systems, Big Line Kits > Fuel Systems > Other fuel system upgrades
Fuel Systems, Big Line Kits > Big Line kits
Fuel Systems, Big Line Kits > Fuel Systems
Fuel Systems, Big Line Kits