Products

Helpful Links



Join our mailing list!


  Home > Fuel Systems, Big Line Kits > Fuel Systems > Other fuel system upgrades >

P Pump Dual Feed Hose Aluminum



 
VPMAX P Pump Dual Feed Hose with Aluminum Hose Ends and Y Block for 94-98 12V Dodge Cummins trucks.

Allows fuel to enter from two points to keep that hungry P Pump fed!

Hose and fitting assembly comes with hoses attached to fittings as shown in picture ready to use.
The PPDFAL is an aluminum fitting version of our P Pump Dual Feed Kit.
All hose ends and the Y block are black anodized aluminum.
All Metric to JIC adapters are -08 male (AN) Steel
We use high quality Parker 83608 blue push lock hose in this assembly.
Comes assembled as shown.




Note:The plug on the front of the pump requires a 10MM hex key to remove (do NOT use a 3 /8 hex key). These plugs can be difficult to remove without an impact wrench, be careful to not strip the hex out of the plug.

If you need additional fittings check below.




List Price: $99.99
Our Price: $94.99
Internet Only Price: $59.99
You save $40.00!


Availability:: Usually Ships in 24 Hours
Part Number (P/N): PPDFAL


Accessories:
3/8" Push lock x -08 JIC swivel P/N PO186 [Add $3.19]
1/2" Push lock x -08 JIC swivel P/N PO188 [Add $2.99]
Filter to Dual Feed accessory kit P/N FDFK [Add $20.00]Kit includes -08 metric adapter for filter outlet, 1/2" 90 deg push lock, 1/2" straight push lock (for dual feed kit connection) and 14" of Parker 386 hose. Assembled on one end only so customer may adjust length.

Qty:  
Description
 
PPDFAL      (.9)


Browse for more products in the same category as this item:

Fuel Systems, Big Line Kits > Fuel Systems > Other fuel system upgrades
Fuel Systems, Big Line Kits > Big Line kits
Fuel Systems, Big Line Kits > Fuel Systems
Fuel Systems, Big Line Kits